SMALL DRONE FRAMES

Product Details:

If you are a beginner and want to learn how to build a drone on your own, you have to understand first what a drone frame is and then determine which motor,  propeller, and other will be used with this frame with this kept in mind The F330 drone frame is the best for you.

This F330 Quadcopter Frame is made from Glass Fiber which makes it tough and durable. They have the arms of ultra-durable Polyamide-Nylon which are the stronger molded arms having a very good thickness so no more arm breakage at the motor mounts on a hard landing. The arms have support ridges on them, which improves stability and provides faster forward flight.

The arms of the frame are colored as 2 red and 2 white which can guide you to fly in the right direction.

The F330 Glass Fiber Mini Quadcopter Frame is strong, light, and has a sensible configuration including a PCB(Printed Circuit Board) with which you can directly solder your ESC‘s to the Quadcopter. So, making the Quadcopter build fast and easy. So, it avoids the use of extra PDB(Power Distribution Board) and makes the mounting clean and neat. The F330 Quadcopter Frame is a highly flexible frame during the mounting of various components like flight controller, battery, etc.

The frame has a wheelbase of 330mm and weighs around 170gm. It features mounting tabs at the front and rear end on the bottom plate of the mainframe for mounting cameras and other accessories.

It comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the mainframe is done within a few minutes. Also, it requires one size of bolt for the overall build and thus a unique one-size hex wrench which makes hardware mounting very convenient. This feature of the Q450 Quadcopter Frame makes them so easy to assemble and disassemble.

Product Details:

The Q250 is a mini-size quadcopter frame. The Q250 Quadcopter Frame is known for its simple and compact design. The special thing about this frames design is it features red and white fiberglass arms which have the downward angle design.

This Q250 Quadcopter Frame is made from Glass Fiber which makes it tough and durable. They have the arms of ultra-durable Polyamide Nylon which are the stronger molded arms having a very good thickness so no more arm breakage at the motor mounts on a hard landing. The arms have support ridges on them, which improves stability and provides faster forward flight.

The frame is lightweight and possesses thick arms, so as to give them good mechanical strength. The mini-size design of this quadcopter frame makes it aerodynamically efficient which will require lower throttle to hover. The design allows the whole take-off weight to be controlled at about 500 grams!!!! Great!!!!!

They are strong, light, and have a sensible configuration including a PCB(Printed Circuit Board) with which you can directly solder your ESC‘s to the Quadcopter. So, making the Quadcopter build fast and easy. So, it avoids the use of extra PDB(Power Distribution Board) and makes the mounting clean and neat.

The frame has the wheelbase of 250mm and weighs around 120gm. It features a mounting tab at the front end on the bottom plate of the main frame for mounting cameras and other accessories.

It comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the main frame is done within few minutes.  Also, it requires one size of bolt for the overall build and thus a unique one size hex wrench which makes hardware mounting very convenient. This feature of Q250 Quadcopter Frame is responsible for fast assembling and disassembling.

Product Details:

The QAV250 is a mini-size quadcopter frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. This frame is known for its toughness and durability.

This QAV250 Quadcopter Frame is made from Carbon Fiber which makes it tough and durable. The carbon fiber arms of thickness 3mm which ensure no more arm breakage at the motor mounts on a hard landing. The arms have dampers at the end, which protects motors during the crash.

The carbon fiber is mostly accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance.

The frame is lightweight and possesses thick arms, so as to give them good mechanical strength. The mini-size design of this quadcopter frame makes it aerodynamically efficient which will require lower throttle to hover. The design allows the whole take-off weight to be controlled at about 500-600 grams!!!! Great!!!!!

The frame has a wheelbase of 250mm and weighs around 160gm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 37mm board cams as well as cams in cases with mounting bracket.

Its longer top and bottom plate allow easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

The Q250 Carbon Fiber Quadcopter Frame equips anodized alloy spacers. The arms of this carbon fiber frame feature multiple motor mounting holes so as to fit a variety of motors. It equips a vibration-free mounting bracket for housing the camera on the frame.

 

Product Details:

This ZD850mm Full Carbon Fiber 850mm Hexa-Rotor Frame Combo is ideal for Heavy Duty Drone Applications because of its capability of withstanding the punishing requirements of heavy-duty drone application!!! Let us explain why…

The thing that separates this Z850 Full Carbon Fiber Frame from the rest of Multirotor Frames is the use of 100% pure carbon for manufacturing this Hexacopter Frame. This Hexacopter Frame is made up of 100% 3K TWILL carbon fiber.

The arms of the frame are made from a 20mm carbon fiber tube which eliminates arm breakage at the motor mounts on a hard landing. 

This is Hexacopter Frame that employs 6 arms to get into the air. There are several advantages of a hexacopter frame over a quadcopter one, justifying the extra price tag.

For 6 arms, of course, there are more motors with a hexacopter meaning more power, meaning bigger batteries. This increase in batteries leads to an increase in flight time, which is also nice. Due to these extra motors, a hexacopter is also more stable than your quadcopter equivalent.

Another great advantage of using hexacopters is if for any reason your quadcopter loses a motor, it goes down but with a hexacopter, on the other hand, in the majority of cases you will be able to land safely with one or maybe even two motors down; an extra inbuilt guarantee on your beloved copter.

The frame has a wheelbase of 850mm and weighs around 1210gm. The Z850mm Full Carbon Fiber 850mm Hexa-Rotor Frame Combo is specially designed for heavy-duty drone application and has lots of space for mounting all the required components. This frame is ideal for mounting cameras and other accessories.

Product Details:

• The Tarot Iron Man 680 adopts Toray 3K carbon fiber woven cloth fiber board, with 3K hollow twill pure carbon fiber tube . A full CNC machining design with higher standards than similar priced products. All the carbon and CNC work means the full frame weighs only 600 grams! The Full folding design makes for a high portability design and is highly adjustable to meet the needs of most utilitarian applications.
• The Tarot 680 series with its high portability, lends itself to off the beaten path flying and tasks such as aerial photography, remote sensing, mapping, life exploration and the list goes on. If you’re ready for a pro grade multirotor platform, look no further than the Tarot 680.
• Features:
• • Fold-ability for transportation and storage
• • Lightweight
• • 15 Minute flight times (Dependent on setup)
• • Folding landing gear
• Specs:
• Size motor to motor: 680mm
• Weight: 600g
• Height from ground to lower rods: 180mm
• Height from ground to top: 220mm
• Required:
• 5ch Radio system
• Flight controller
• Propeller size: 10~13 inch carbon fiber propeller
• Motor: 620~980KV 2212~4006 brushless motor
• Battery specifications: 11.1~14.8V 3000~5000mAh
• Brushless ESC: 20~30A

Tarot Iron Man 650 Rack adopts Toray 3K carbon fiber cloth woven carbon fiber board with 3K hollow twill pure carbon fiber carbon fiber tube (non-3K glassy carbon tube) CNC machining,design standards higher than similar products, the full set of rack weighs only 476 grams. Full folding design, installation designed for users with high portability requirements,the user can flexibly according to the weight of the loaded photographic equipment adjust the center of gravity. Particularly suited to do surveillance, remote sensing, mapping, aerial reconnaissance, fire observed explore life cable line patrol, farm monitoring, and other the mobile performance requirements equipment. You may need other Tarot Quadcopter for your other options and comparison.

Product Details:

Tarot Iron Man 650 Rack adopts Toray 3K carbon fiber cloth woven carbon fiber board with 3K hollow twill pure carbon fiber carbon fiber tube (non-3K glassy carbon tube) CNC machining,design standards higher than similar products, the full set of rack weighs only 476 grams. Full folding design, installation designed for users with high portability requirements,the user can flexibly according to the weight of the loaded photographic equipment adjust the center of gravity. Particularly suited to do surveillance, remote sensing, mapping, aerial reconnaissance, fire observed explore life cable line patrol, farm monitoring, and other the mobile performance requirements equipment. You may need other Tarot Quadcopter for your other options and comparison.

Product Details:

Tarot 810 Sport 6-axis Carbon Fiber Fpv Hexacopter Frame Kit With Landing GearPure Carbon Main Frame Is Japan Toray 3K Carbon Fiber Applied And Cnc ProcessedPure Carbon Matte Cf Plate Has Ultra-high Quality And StrengthFoldable Design Is Allowed To Equip With Wiring Directrchy; Please Avoid Connecting Circuit By PlugMain Frame Has M3 Nut Self-locking On The Carbon Fiber Plate, The Thread Structure Has Self-locking Design, Which Is Capable To Resist Lateral VibrationFoldable Portion Has Unique Clamping Design, Which Has Strong Stronger StructureThe Whole Set Is Non-slip While Folding. Lightweight Dual Color Motor Has Been Cnc Processed, The Appearance Has Strong Visual EffectRecommended:
Description 
Tarot 810 Sport 6-axis Carbon Fiber Fpv Hexacopter Frame Kit With Landing GearPure Carbon Main Frame Is Japan Toray 3K Carbon Fiber Applied And Cnc ProcessedPure Carbon Matte Cf Plate Has Ultra-high Quality And StrengthFoldable Design Is Allowed To Equip With Wiring Directrchy; Please Avoid Connecting Circuit By PlugMain Frame Has M3 Nut Self-locking On The Carbon Fiber Plate, The Thread Structure Has Self-locking Design, Which Is Capable To Resist Lateral VibrationFoldable Portion Has Unique Clamping Design, Which Has Strong Stronger StructureThe Whole Set Is Non-slip While Folding. Lightweight Dual Color Motor Has Been Cnc Processed, The Appearance Has Strong Visual EffectRecommended:4114/320Kv Multi-axis Brushless Motor Tl100B081555 Streamlined Carbon Multi-axis Positive And Negative Paddle Tl281230-35 Multi-axis Esc6S Power Battery 10000-15000Mah

Product Details:

• This Q250 Quadcopter Frame is made from Carbon Fiber which makes it tough and durable. The carbon fiber arms of thickness 4mm which ensure no more arm breakage at the motor mounts on a hard landing. The arms have dampers at the end, which protects motors during the crash.

  The carbon fiber is mostly accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance.

  The frame is lightweight and possesses thick arms, so as to give them good mechanical strength. The mini-size design of this quadcopter frame makes it aerodynamically efficient which will require lower throttle to hover. The design allows the whole take-off weight to be controlled at about 500-600 grams!!!! Great!!!!!

  The frame has the wheelbase of 250mm and weighs around 160gm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 37mm board cams as well as cams in cases with mounting brackets.

  It’s longer top and bottom plate allow easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

  The Q250 Carbon Fiber Quadcopter Frame equips anodized alloy spacers. The arms of this carbon fiber frame feature multiple motor mounting holes so as to fit a variety of motors. It equips vibration-free mounting bracket for housing the camera on the frame.

Product Details:

DRONE FRAME

Product Details:

Features: Material: Glass Fiber Compatible with MWC KK Rabbit Pirate Flight Controller. High compatible fiber motor mount suit for all 22 series motors. Motor could mount on upper or down position at Y3 mode. Portable design simple operation. No need ESC connection board already integrated on center plate.Recommend: Motor: X2212 KV980-1250 Servo: 8-9g servo recommend metal gear digital servo such as ES08MD ESC: 15A-20A or above Propeller: 8-10inch multicopter propeller Battery: 1500-3000MA/ 20C/3S-4S Li-Po batterySpecifications: Package size: 29 * 16 * 4.5cm / 11.4 * 6.3 * 1.8in Package weight: 316g / 11.1ozPackage List: 1 * Glass Fiber Y3 Frame(self-assembled) 1 * MG90S (Includes the Y3 frame and MG90S only!)0

Additional Information:

• Item Code: TRI-TRAOT
• Production Capacity: 0.5KG
• Delivery Time: 3-DAYS
• Packaging Details: 10*5*15

Product Details:

Product Details:

1. Wheelbase: 550mm
2. Weight: 550g/720g(without/with gimbal)
3. Adopts S800 upward tilt arm design – Plastic injection moduling
4. Ensures hardness and lighter weight – Brushless gimbal compatible for FPV
5. It comes with PCB center board of soldered
6. The arm equips support ridges for better and faster forward flight.
7. Features pre-threaded brass sleeves.

Product Details:

We are offering Tarot TL65S01 -650 Sports to our client

Product Details:

DRONE FRAME