Product Details:
Brand | Yuvvraj Global Traders |
Power | 220V |
Capacity | 10L |
Camera Technology | Analog Camera |
Material | Carbon Fiber |
Mode | Semi-Automatic |
Product Details:
Material | Fiber Glass |
Usage/Application | Industrial |
Vehicle Type | Light Vehicle |
Size | 100x70x2mm |
Color | Black |
Weight | 210gm |
Finishing | Matte |
Product Details:
Material | Carbon Fiber |
Model Name/Number | F450 |
Dimension | 23x4x4cm |
Color | White |
Weight | 50gm |
Length | 220mm |
Width | 40mm |
Motor Mounting Holes Dia. | 3mm |
Most of the Drone landings are not perfect at all!!!! If you haven’t flown any drone yet then we believe the same is true for your flying too. But except these facts, every drone suffers from unexpected crashes throughout his life whether the Drone Flyer Person is a newbie enthusiast or an experienced professional.
It’s usual that when a drone crashes, the impact mainly affects the Arms of the drone. Because of this concern only it is ideal that a drone should have detachable arms to provide a wide lifecycle to the Multirotors.
This Replacement Arm is made from good-quality Polyamide Nylon, especially for F450 F550 Multirotor Frames. This lightweight arm is exactly the same as the original F450 F550 Multirotor Frames.
The F450 F550 Replacement Arm White(220mm) for Multirotor Frame comes with the thick body. It comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the main frame is done within few minutes.
Now do not worry about your crashed drone, equip this Replacement Arm for F450 F550 Multirotor Frames quickly and get it in the air as soon as possible.
Product Details:
Material | Carbon Fibre |
Usage/Application | Aircraft |
Length | 200mm |
Diameter | 8mm |
Weight | 230gm |
Color | Black |
Width | 300mm |
The Plastic Landing Gear provides around 150 mm of ground clearance which is just more than sufficient to mount Gimbals or Battery like large equipment at the bottom of your flying machine. Their special purpose is to keep the center unobstructed for mounting cameras, gimbals, batteries, etc. and also giving the protection to those mountings.
The Landing Gear is made up of high-quality ABS Plastic. This landing gear is very easy to install on your Multirotor.With such crab legs, you do not have to worry too much about the landing of your Multirotor as the Landing Gears are the best solution to reduce the impact of hard and rough landings.
Product Details:
Material | Brass |
Pitch Size | 3.5 mm |
Usage/Application | Motor Connection |
Configuration | Circular/Cylindrical connector |
Weight | 0.01kg |
Plating | Gold |
Current Rating | 30A |
Dimension | 8x6x3cm |
Product Details:
Type | Mini Drone Megaphone |
Model Name/Number | FIMI X8SE 2020 |
Siren Range | 10 ft |
Color | Black |
Material | ABS (UV Protected) |
Voltage | 24V DC |
Power Source | DC/Battery |
Weight | 260g |
Battery Type | Lithium |
Product Details:
Material | Carbon Fibre |
Usage/Application | Aircraft |
Length | 200mm |
Diameter | 8mm |
Frequency | 50Hz |
Weight | 230gm |
Brand | Tarot |
Color | Black |
Product Details:
Minimum Order Quantity | 1 Piece |
Power | 220V |
Color | Black |
Max Height | 1 feet |
Wifi Enabled | Yes |
Country of Origin | Made in India |
Brand | EFT |
Material | Carbon Fiber |
Model Name/Number | EFT GPS Stand |
Additional Information:
Product Details:
Torque | 0.40 mNm |
No of Poles | 1 |
Voltage | 220 V |
Speed | 1200 RPM |
Brand | Yuvvraj Global Traders |
Application | Robot |
Power | 400 W |
Phase | Single Phase |
Rotation | CW |
Product Details:
Usage/Application | Car |
Screen Size | 3.5 Inch |
Type | Wireless |
Is It Mobile Access | Mobile Access |
Material | Aluminium |
Color | Black |
GPS Plate Diameter | 40mm |
Base Plate Diameter | 35mm |
Weight | 20gm |
Height | 14cm |
Mounting Hole Spacing: | 16-35mm |
Mounting Rod Diameter | 4mm |
GPS FOLDING ANTENNA BASE SET/BLACK is used to mount GPS device on the flight. GPS devices are most accurate if their antennas have a clear view of the sky. GPS/Compass modules are also prone to the electromagnetic interference generated by motors, ESCs, and radio transmission equipment.
Given both of these factors, for the best possible performance, it makes sense to use an extended mount to position your GPS/Compass far away from the sources of interference and well above your multirotor. This mount measures 16cm, which is more than tall enough for most installations. Best still, the mount can be quickly folded without any tools for transportation or storage.
The mount comes will a laser cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.
Product Details:
Material | HDPE |
Usage/Application | Motor Cycle |
Product Type | Langing Gears |
Color | Red |
Size | 15.2 x 7.6 x 10.2cm |
Diameter | 130mm |
Weight | 18.1gm |
Finishing | Matte |
Product Details:
Country of Origin | Made in India |
Brand | Yuvvraj Global Traders |
Transistor Type | PNP |
Mounting Type | SMD |
Voltage | 220V |
Maximum Operating Frequency | 60Hz |