Product Details:
Capacity | 15kg |
Material | Carbon Fiber |
Model Name/Number | Hercules 20 |
Camera Technology | Digital Camera |
Modes | Multifunction |
Dimension | 2050x1805x543mm |
Camera Technique | Vector control drive technology |
Pixel | 1080x1020 |
Power | 90W |
Color | Silver |
Flying Time (with payload) | 40 minutes without payload |
Aircraft weight (without battery) | 11 kg |
Weather Conditions | Moderate Rains -20 DegreeC (-4 DegreeF) /+45 DegreeC (113 DegreeF) |
Max Flight Speed | 25 m/s (90 km/h |
Propulsion | T-Motor MN 701 - 135 KV Dust-resistance/Waterproof (IP45) Anti-corrosion |
Remote Controller/Video Transmission/Telemetry Range | Up to 2 km |
Propellers | 660 mm |
Frame | 100% carbon frame & anodized aluminum |
Product Details:
Material | Carbon Fiber |
Model Name/Number | Q250 |
Usage/Application | Outdoor |
Modes | Multiple protection |
Camera Technique | Vector control drive technology |
Pixel | 1080x1020 |
Dimension | 114x25mm |
Color | Black, Pink and Green |
Height | 80mm |
Brand | NAZA |
Weight | 160gm |
Arm Thickness | 4mm |
The Q250 is a mini-size quadcopter frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.
This Q250 Quadcopter Super Strong Carbon Fiber is manufactured with excellent quality Carbon Fiber for making it more sturdy and strong, hence we call it super strong carbon fiber Q250 Quadcopter Frame. This Quadcopter Frame has incredible strength and reduced weight. This Q250 carbon fiber frame is available in 2 different choices at Robu.in as follow
>> Q250 Carbon Fiber Quadcopter Frame for FPV Racing
>> Q250 Super Stong Carbon Fiber Quadcopter Frame for FPV Racing
This Q250 Quadcopter Frame is made from Carbon Fiber which makes it tough and durable. The carbon fiber arms of thickness 4mm which ensure no more arm breakage at the motor mounts on a hard landing. The arms have dampers at the end, which protects motors during the crash.
The carbon fiber is mostly accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance.
The frame is lightweight and possesses thick arms, so as to give them good mechanical strength. The mini-size design of this quadcopter frame makes it aerodynamically efficient which will require lower throttle to hover. The design allows the whole take-off weight to be controlled at about 500-600 grams!!!! Great!!!!!
The frame has the wheelbase of 250mm and weighs around 160gm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 37mm board cams as well as cams in cases with mounting brackets.
It’s longer top and bottom plate allow easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!
The Q250 Carbon Fiber Quadcopter Frame equips anodized alloy spacers. The arms of this carbon fiber frame feature multiple motor mounting holes so as to fit a variety of motors. It equips vibration-free mounting bracket for housing the camera on the frame.
Product Details:
Brand | NAZA |
Material | Carbon Fiber |
Model Name/Number | MV2 |
Modes | flight control |
Dimension | 50x12x5cm |
Pixel | 1080x1020 |
Color | Black |
Weight | 760gm |
Wheelbase | 550mm |
Model | S550 |
This is an Upgraded Hexacopter Frame which employs 6 arms to get into the air. There are several advantages of a hexacopter frame over a quadcopter one, justifying the extra price tag.
For 6 arms, of course, there are more motors with a hexacopter meaning more power, meaning bigger batteries. This increase in batteries leads to an increase in flight time, which is also nice. Due to these extra motors, a hexacopter is also more stable than your quadcopter equivalent.
Another great advantage of using hexacopters is if for any reason your quadcopter loses a motor, it goes down but with a hexacopter, on the other hand, in the majority of cases you will be able to land safely with one or maybe even two motors down; an extra inbuilt guarantee on your beloved copter.
The S500 has strong, light, and have a sensible configuration including a PCB(Printed Circuit Board) with which you can directly solder your ESC‘s to the Quadcopter. So, making the Quadcopter build fast and easy. So, it avoids the use of extra PDB(Power Distribution Board) and makes the mounting clean and neat. The S550 Hexacopter Frame is a highly flexible frame during the mounting of various components like flight controller, battery, etc.
The S550 hexacopter frame kit is an excellent strong lightweight Hexacopter frame with carbon fiber landing gear and a bonus built-in the printed circuit board (PCB) for neat and easy wiring. It comes with an integrated PCB for neat and easy wiring. The added lift capacity of a hex configuration makes this frame for carrying larger payloads such as camera systems and other electronic components. This makes for an exceptional camera rig or simply a very agile and powerful multi-rotor frame for aerobatics.
It comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the mainframe is done within few minutes. Also, it requires one size of bolt for the overall build and thus a unique one-size hex wrench which makes hardware mounting very convenient.
The assembly of this frame is super simple with pre-threaded sleeves for all the frame bolts so no lock-nuts are required. The motor mounts are ready to take a selection of motors with mounting hole centres of 16, 19 and 25 mm once again making this a very universal frame at a very affordable price.
The frame has the wheelbase of 550mm and the whole frame kit weighs around 760gm. It features mounting tabs at the front and rear end on the bottom plate of the mainframe for mounting cameras and other accessories.
Product Details:
I Deal In | New Only |
Voltage | 220V |
Type Of Machines | Cleaning Machine |
Power Source | Electric |
Usage/Application | Cleaning |
Country of Origin | Made in India |
Brand | Yuvvraj Global Traders |