Yuvvraj Global Traders
Gudadhi, Akola, Maharashtra
GST No. 27ANXPH5113M1ZH
TrustSEAL Verified
Call 08043805049 92% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Motor Type | Brushless |
The DAMIAO DM-J6248P-2EC is an all-in-one brushless servo joint for robotic arms, integrating the motor and driver in a compact module. Dual encoders provide single-turn absolute output-shaft positioning, while CAN FD (up to 5 Mbps) with PC visual tuning and CAN parameter read/write enables precise control with rich telemetry and built-in protections.
Key Features
Integrated motor + driver design for high integration and easy wiring
Dual encoders, absolute output-shaft (single-turn)—no homing, position retained after power cycles
CAN FD up to 5 Mbps, PC visual tuning, CAN parameter read/write
Telemetry & protection: speed/position/torque/temperature feedback, dual-temperature protection, CAN firmware upgrade
Your Purchase Includes
1x Motor (with driver)
1x Power & CAN cable — XT30(2+2)-F, single-ended, 100 mm
1x Tuning serial cable — GH1.25 3-pin (reverse), 300 mm
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Brand | DM-J4340p-2EC MIT-Driven Brushless Servo Joint Motor with Dual Encoders & Gear Reduction for Robotic |
| Torque | 7 Nm |
| Motor Type | Brushless |
The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position mode), ensuring precise control and smooth motion.
Key Features
1. Dual encoders provide single-turn absolute positioning of the output shaft, ensuring no loss of position even after power-off.
2. Integrated motor and driver design offers a compact and highly integrated structure.
3. Supports PC-based visual tuning and firmware upgrades.
4. CAN bus enables real-time feedback of motor speed, position, torque, and temperature.
5. Equipped with dual overtemperature protection mechanisms.
6. Trapezoidal acceleration and deceleration supported in position mode.
Frequently Bought With:
Agility A1 Robotic Arm (Designed Based on the OpenArm Open-Source Platform)
Damiao 8009P Motor
Damiao 4340 Motor
Damiao 4310 Motor
Your Purchase Includes
1× Motor (with integrated driver)
1× Power & CAN Communication Cable: XT30(2+2)-F Single-ended Connector (100mm)
1× Tuning Serial Signal Cable: GH1.25 3-pin (Reverse-facing, 300mm)
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Motor Type | Brushless |
The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position mode), ensuring precise control and smooth motion.
Key Features
1. Dual encoders provide single-turn absolute positioning of the output shaft, ensuring no loss of position even after power-off.
2. Integrated motor and driver design offers a compact and highly integrated structure.
3. Supports PC-based visual tuning and firmware upgrades.
4. CAN bus enables real-time feedback of motor speed, position, torque, and temperature.
5. Equipped with dual overtemperature protection mechanisms.
6. Trapezoidal acceleration and deceleration supported in position mode.
Frequently Bought With:
Agility A1 Robotic Arm (Designed Based on the OpenArm Open-Source Platform)
Damiao 8009P Motor
Damiao 4340P Motor
Damiao 4310 Motor
Your Purchase Includes
1× Motor (with integrated driver)
1× Power & CAN Communication Cable: XT30(2+2)-F Single-ended Connector (100mm)
1× Tuning Serial Signal Cable: GH1.25 3-pin (Reverse-facing, 300mm)
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Motor Type | Brushless |
Note: The DM-J8009P-2EC model uses a crossed roller bearing on the output shaft, while the DM-J8009-2EC model uses a thin-section deep groove ball bearing.
The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position mode), ensuring precise control and smooth motion.
Key Features:
· Integrated Driver: No need for an external motor driver, simplifying system design.
· Three Operation Modes: Supports MIT mode, Speed mode, and Position mode for versatile motion control.
· Built-in Gear Reduction: Enhances torque output while maintaining compact size.
· Dual Encoders: Ensures high-precision position and speed feedback for optimal control.
Frequently Bought With:
Agility A1 Robotic Arm (Designed Based on the OpenArm Open-Source Platform)
Damiao 4340P Motor
Damiao 4340 Motor
Damiao 4310 Motor
Your Purchase Includes:
1x DM-J8009P Motor (with Integrated Driver)
1x Power Connection Cable: XT30 Male-to-Female Power Cable (Length: 200mm)
1x CAN Communication Cable: GH1.25 2-pin Connector (Length: 300mm)
1x Tuning Serial Port Signal Cable: GH1.25 3-pin Connector (Length: 300mm)
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Motor Type | Brushless |
The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position mode), ensuring precise control and smooth motion.
Key Features:
· Integrated Driver: No need for an external motor driver, simplifying system design.
· Three Operation Modes: Supports MIT mode, Speed mode, and Position mode for versatile motion control.
· Built-in Gear Reduction: Enhances torque output while maintaining compact size.
· Dual Encoders: Ensures high-precision position and speed feedback for optimal control.
Your Purchase Includes:
1x DM-J8009 Motor (with Integrated Driver)
1x Power Connection Cable: XT30 Male-to-Female Power Cable
1x CAN Communication Cable: GH1.25 2-pin Connector
1x Tuning Serial Port Signal Cable: GH1.25 3-pin Connector
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Motor Type | Brushless |
The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position mode), ensuring precise control and smooth motion.
Key Features:
· Integrated Driver: No need for an external motor driver, simplifying system design.
· Three Operation Modes: Supports MIT mode, Speed mode, and Position mode for versatile motion control.
· Built-in Gear Reduction: Enhances torque output while maintaining compact size.
· Dual Encoders: Ensures high-precision position and speed feedback for optimal control.
Your Purchase Includes:
1x DM-J8006 Motor (with Integrated Driver)
1x Power Connection Cable: XT30 Male-to-Female Power Cable
1x CAN Communication Connector: GH1.25 2-pin Cable
1x Tuning Serial Port Signal Cable: GH1.25 3-pin Cable
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Motor Type | Brushless |
The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position mode), ensuring precise control and smooth motion.
Key Features:
· Integrated Driver: No need for an external motor driver, simplifying system design.
· Three Operation Modes: Supports MIT mode, Speed mode, and Position mode for versatile motion control.
· Built-in Gear Reduction: Enhances torque output while maintaining compact size.
· Dual Encoders: Ensures high-precision position and speed feedback for optimal control.
Your Purchase Includes:
1x Motor (with Integrated Driver)
1x Power Connection Cable: XT30 Male-to-Female Power Cable
1x CAN Communication Connector: GH1.25 2-pin Cable
1x Tuning Serial Port Signal Cable: GH1.25 3-pin Cable
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Motor Type | Brushless |
The DAMIAO DM-J10010-2EC MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position mode), ensuring precise control and smooth motion.
Key Features
1. Dual encoders provide single-turn absolute position output on the output shaft, ensuring no loss of position even after power failure.
2. Integrated motor and driver design, featuring a compact and highly integrated structure.
3. Supports visual debugging via upper-computer software and firmware upgrades.
4. Capable of reporting motor speed, position, torque, and temperature via CAN bus.
5. Equipped with dual temperature protection.
6. Supports trapezoidal acceleration and deceleration in position control mode.
Your Purchase Includes
1. Motor (with driver)
1x Power cable: XT60 male-to-female power cable (200mm)
1x CAN communication terminal: GH1.25 2-pin cable (opposite side,300mm)
1x Debug serial signal cable: GH1.25 3-pin cable (opposite side, 300mm)
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Motor Type | Brushless |
The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position mode), ensuring precise control and smooth motion.
Key Features
1. Dual encoders provide single-turn absolute position of the output shaft, ensuring no loss of position even after power-off.
2. Integrated motor and driver design for a compact structure and high level of integration.
3. Supports PC-based visual debugging and firmware upgrades.
4. CAN FD compatible, with a maximum baud rate of up to 5 Mbps.
5. Motor speed, position, torque, and temperature can be fed back via the CAN bus.
6. Dual temperature protection mechanism.
7. Low speed, high torque output.
8. Multiple control modes with flexible switching.
Your Purchase Includes：
1× DM-J3507-2EC (24V/48V ）Motor (with integrated driver)
1× Power + CAN Communication Cable: SH1.0 3-pin Connector (200mm)
1× Tuning Serial Signal Cable: SH1.0 8-pin Connector (200mm)
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Phase | Three Phase |
| Motor Type | Brushless |
The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position mode), ensuring precise control and smooth motion.
Key Features:
· Integrated Driver: No need for an external motor driver, simplifying system design.
· Three Operation Modes: Supports MIT mode, Speed mode, and Position mode for versatile motion control.
· Built-in Gear Reduction: Enhances torque output while maintaining compact size.
· Dual Encoders: Ensures high-precision position and speed feedback for optimal control.
Frequently Bought With:
Agility A1 Robotic Arm (Designed Based on the OpenArm Open-Source Platform)
Damiao 8009P Motor
Damiao 4340P Motor
Damiao 4340 Motor
Your Purchase Includes:
1x DM-J4310-2EC V1.1 (with Integrated Driver) (24V/48V)
1x Power Cable (with CAN communication terminals): XT30(2+2)-F Single-ended Connector Cable (100mm)
1x Tuning Serial Port Signal Cable: GH1.25 3-pin (reverse, 300mm)